WHEEL BEARING REPACK
The wheels generate heat in excess of 250 degrees and the grease will break down due to this heating and cooling. The bearings (both inner and outer of each wheel) need to be removed, cleaned, inspected and repacked with new grease every 6,000 miles of towing or every year regardless of miles. This service will prevent costly repairs and premature failure of the bearing assembly. All seals are replaced.
ROTATE TIRES AND ADJUST BRAKE ASSEMBLIES
The brakes on your trailer need this service yearly to assure proper operation. The brake shoes require adjusting and the operation of the electrical system needs to be checked. Rotate tires for maximum wear. Note: Trailer brakes are not self-adjusting.
ROOF SEAMS AND SEALANTS
Water intrusion causes damage and delamination to the coach structure. Inspecting yearly and filling small voids in the sealants can prevent this from becoming a costly repair. In some cases, a full scrape, buff and reseal may be necessary. Owners are responsible for inspecting sealants every 90 days.
APPLIANCE BURNER ASSEMBLY SERVICE
Corrosion in the burner assembly leads to high resistance for the igniters. The resistance leads to premature failure of costly electrical parts. The LP portion of these appliances, just as your home heating systems, needs to be cleaned and adjusted. This service needs to be performed yearly on the refrigerator, furnace, water heater and range.
LP SYSTEM LEAK/PRESSURE CHECK
This is a safety issue. The time to find a leak is not when you smell LP, most leaks start small and progress. The LP leak check is performed at time of purchase and every time an LP fitting is disconnected. You need to ensure this service is performed yearly.